|
|
|
|
Joined: Jun 2002
Posts: 33
Member
|
OP
Member
Joined: Jun 2002
Posts: 33 |
Thanks for the replies. I know that I will have to replace the 8X24 units, but the two main issues would be 1.) do all systems require the same software version (what about version release), and 2.) can I do this with only one T-1 in each system? If so then I suppose I would need the PRI enabler at each of the 4 locations?
Also, are the Startalk 2.0 and higher compatible with V7.0XC if I choose to do an interum step of replacing the 8X24 with MICS prior to networking? Marv, I looked at one of your posts with the compatibility matrix, but 7.0 was not on there. I saw where 6.1 was compatible.
Again thanks for the replies.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,305
Posts638,893
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
67
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
