Flash VM - Gone|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Flash VM - Gone #132892 04/09/07 05:57 AM
Joined: Jun 2004 Posts: 33 Seaman, OH, USA daktech2003 OP Member
OP daktech2003 Member Joined: Jun 2004 Posts: 33 Seaman, OH, USA	Greetings, Sometime over the weekend our vm quit working. As in "Inactive Feature" on the display. I have cycled power, reseated card, checked DNs (ok), removed all inactive feature codes via xftest. I am now able to get vm to prompt me for password ("LOG") but have to dial the ext first. None of the feature codes for vm work (f9*1, 983, 981). I have also tried Feature 903, however 903 is for ACD at our site so it wants me to log in. I have a laptop connected to vm. Passes everything on boot. When I log in, it says "Nortel xxx Configuration in Progress" ( I cant remember if xxx=flash or not). If I watch the laptop, it does generate messages saying things like Cannot answer call RC? Any suggestions?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Flash VM - Gone	daktech2003	04/09/07 09:57 AM
Re: Flash VM - Gone	telemarv	04/09/07 11:19 AM
Re: Flash VM - Gone	daktech2003	04/09/07 12:05 PM
Re: Flash VM - Gone	NTlayoff	04/09/07 04:37 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Flash VM - Gone