atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Installing ATA-2 in our Nortel system, no dial tone, etc

Print Thread

Rate Thread

Re: Installing ATA-2 in our Nortel system, no dial tone, etc #133772 08/02/07 04:53 AM
Joined: Jun 2007 Posts: 15 San Antonio, TX pimpin-tl OP Member
OP pimpin-tl Member Joined: Jun 2007 Posts: 15 San Antonio, TX	Well, an update. The device has been working fine till now. Now it seems to stop working and the only way to get it to work is to unplug the actual RJ11 from the input (the phone system) side and plug it back in. The device then gives us a dialtone. Anyone have any ideas why this might be happening?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 11:29 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 11:31 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	telemarv	06/04/07 11:39 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 11:41 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 02:20 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	MooreTel	06/04/07 03:30 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 03:33 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	DMCSALES	06/04/07 06:17 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	vad60	06/04/07 06:48 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/04/07 07:40 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/05/07 10:45 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	telemarv	06/05/07 11:42 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/05/07 11:44 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	vad60	06/05/07 06:51 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/06/07 06:18 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	Nickels	06/06/07 03:00 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	06/06/07 03:06 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	MooreTel	06/06/07 08:17 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	Frank_DaFoneguy	06/29/07 12:56 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	Lightning horse	06/29/07 04:52 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	Lightning horse	07/06/07 07:06 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	07/09/07 06:35 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	MooreTel	07/10/07 05:54 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	Lightning horse	07/10/07 03:11 PM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	08/02/07 08:53 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	RATHER BE FISHING	08/02/07 09:03 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	08/02/07 09:12 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	RATHER BE FISHING	08/02/07 09:24 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	08/02/07 09:27 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	RATHER BE FISHING	08/02/07 09:32 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	pimpin-tl	08/02/07 09:33 AM
Re: Installing ATA-2 in our Nortel system, no dial tone, etc	vad60	08/02/07 06:32 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

Forum Statistics

Forums84

Topics94,317

Posts638,931

Members49,775

Most Online5,661
May 23rd, 2018