I'm missing something, but what?
MICS 7.0, CallPilot 150 3.1
One PRI (PRI-A), One LS/DS (Pool A)
Callpilot DN 243-244 (Access to PRI-A &Pool A)
Route 000=Pool A, No Dest Code
Route 001=PRI A, Dest Code 3
I want to present caller with 6 options each dialing an external number (Yellow Pages misprinted telephone numbers)
Paths are set to use route (I want them to use PRI) for outdial method.
No matter what I put in for the telephone number 3pXXXXXXX, XXXXXXXx, 3XXXXXXX caller hears "routing information is incorrect", or "resources busy".
If I tell it to use line 1 it works.
