The amps I have, look like they are older than dirt, 1 Executone PBK 6150 and 2 ExecuTone PBK 675.
The tech help from Valcomm was very good and they walked me through testing out-put per zone. Using my butt set to each zone out-put.
I must have something different for a phone system then what I posted, b/c I do get DTMF and so the Valcomm does give me the zoned paging.
I have a connection from the page port (W/Bl-BL/W) and the contact closure port (W/OR-OR/W) on a 25 pair 66 block from the Valcomm controller.
That part is working okay.
My only last issue is just volume control.
The output from the Valcomm unit for each zone then feeds the 3 amps. Then I have speaker output from the amps, but the Executone amps do not have a volume control.
Is there any way to control volume w/ some sort of standalone piece of equipment?
