|
|
|
|
Joined: Jan 2010
Posts: 18
Member
|
OP
Member
Joined: Jan 2010
Posts: 18 |
I have a customer with a cics. I setup a dial 9 in routing. Forwarded the ext. to the cell phone. I transfered an incoming csll to forwarded ext. The transfered call worked but when the call ended the 2 lines didn't hsngup. The lines were stuck in s busy state. I had to disable and enable the co card to fix. I set the lines to supervised in line cnfg. The lines were unavailable and i had to unsupervise them. Is the problem with CICS or AT&T? I done this on other CICS. The CICS is rel 6.1 with a call pilot.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,299
Posts638,873
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
127
guests, and
319
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
