|
|
Joined: Jun 2004
Posts: 65
Member
|
OP
Member
Joined: Jun 2004
Posts: 65 |
<font face="Verdana, Arial" size="2">Originally posted by MrGemini: As far as I know it should work as I know it works on the digitals. If you can intercom call and transfer to the phantom then we have to assume that it's set up properly. I would retrace your steps in 407 & 408 and delete or clear the entry and start over. Did you try a simple reset of the system? You may want to make sure there are no entries in 603 & 604 DIL 1N. The DIL 1-1 is supposed to overide any entry in 603 & 604 and I know it does on the digitals but again I really never work on the analog systems. I'll try to do a little more investigating. Keep us posted, Thanks, Gem </font> I have revisited all programming and tried some variations on setup, but still can not get it ro ring in to the set. If I program the line (CO8) on a button, it rings in on the CO line button and the phantom ext button OK, but this deafeats the DIL feature. Could the VPS 120 be interacting with this feature? TG8 in the VPS 120 is currently set for no Incoming Call Service. Have not tried the system reset yet. Will give that a shot on the weekend. Let me know if you find any additional info. Thanks for the tips
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
178
guests, and
370
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|