Originally posted by MichaelV:
Is there a way to program the vmail button on a version 6.03 CPC-B DBS to auto log into voicemail? We need it to dial the vm group 600 then dial * and the ext#. Any ideas?
Yea, what Rich said.
:toast: The following 3rd party VM notes are from my website:
https://austintele.com/dbsvm.html Note that you can only program a "lighted" button at the user level if there is NOT a CO line currently assigned to the button.
=======================================
Voice Mail Message Key
A Voice mail message key can be programmed on any button with lights. A VM message key will flash when a message has been received and can be pressed to automatically login to a mailbox. VM message key is programmed at each phone that needs one.
Press "ON/OFF"
Press "PROG"
Touch button to be programmed
Press "CONF", "AUTO"
Dial VM Pilot hunt number
Press "AUTO"
Dial 9XX (this entry represents one of the ten speed dial buttons on the phone, 900-909)
Press "HOLD"
This programs the button to call the voice mail system and then dial whatever is stored in speed dial location 9XX when answered.
To program additional data into the 9XX bin,
Press "ON/OFF"
Press "PROG"
Press "AUTO"
Dial 900-909 or press the associated speed dial button (lower left is 900, upper right is 909)
Dial any digits that the voice mail needs to login to the mailbox (typically a certain digit plus the mailbox number)
Press "HOLD"
