SUCCESS!

Gentlemen: I'm pleased to report that this setup is working A-OK with the Telco PRI attached to the MICS and the link between the MICS and the TDE200 setup as PRI. Here is the config I used:

TDE200:
PRI setup as QSIG-Master, NI2, all numbering plans = "private", all types of number = "unknown"
System>Numbering Plan>Main>Other PBX Extension contains leading digit of all MICS extensions (2,3,5 in this case)
TRG 7 uses dialing plan table 4
Dialing plan table 4 contains 2XX,3XX,5XX, and inserts 9 for NXXNXXXXXX & 1NXXNXXXXXX
Private Network>TIE Table = left at default
CO Line Settings = all channels of PRI set to TRG 7
DID Table = all TDE extensions as 3 digit DID pointed to extension as destination

MICS:
Hardware>PRI Card settings = NI2, ClockSrc = TimMstr, SendNameDisp = YES
SystemProgramming>BusName = NORTEL
SystemProgramming>Rem Line Access = PRI channels all have access to remote package 2 which allows calls to Telco PRI
Lines = target line programmed with 3 digit DID for each MICS extension


All seems to work great, just not sure (highly doubt) that this setup would allow for centralized voicemail.

[Linked Image from web.atcomsystems.ca]
Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!