Now don't take this the wrong way and I don't mean to be rude but if you are going to install MOH on many different systems why don't you join the manual club? For a one time fee you would have 90% of you answers.

Now to answer your question, if you are using a relay control then you need to use program 77-1 and set LED 05 to ON. If not then plug it in the RCA and then turn the VR1 to adjust the level. If you are going to use it for BGM there is a couple of other program you will have to set.



[This message has been edited by dtmf (edited October 28, 2004).]

Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]