There's actually 3 day types, workday, non-workday, and holiday.
Each day type has a start time for day1, day2, and night mode.
DIT the lines to the receptionist phone in day1 and VM pilot number in night mode, then program day/night to start day1 when the workday starts and to start night when the workday ends.
Example: M-F hours are 8am-5pm, Sat 9am-noon.
workday day1 = 08:00, day2 = 99:99, night = 17:00
non-workday day1 = 09:00, day2 = 99:99, night = 12:00
holiday day1 = 99:99, day2 = 99:99, night = 00:00
Set M-F as workday, Sat. as non-workday, Sun. as holiday.
Clear as mud?
