|
|
|
|
Joined: Jul 2008
Posts: 13
Member
|
Member
Joined: Jul 2008
Posts: 13 |
I wanted to build upon this post Since I'm working with OP on this situation.
The LIPU update page on network eManager always gives a page cannot be displayed so the only way for us to update is with the old eManager version 5.10A14. It went through the normal update process but on the card it did the upload, delete, flash reset and got stuck on the reset part and locked up eManager.
I'm in the LIPU-X card now via serial to 6pin adapter on a telnet session and when I do a "dir" there are 0 files created. remain 64 files message. I don't know if I can upload the firmware or bootloader via console because I cannot specify an IP on the NIC since you get a disabled by fault CR.
My Toshiba vendor cannot be here until tomorrow and obviously I do not have the access to call toshiba techs. version cmd in telnet brings up BiosVer.D(D-01)
I'm just trying to unbrick the card.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
307
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
