|
|
Joined: Apr 2010
Posts: 37
Member
|
OP
Member
Joined: Apr 2010
Posts: 37 |
I setup a new Node ID, setup the route plan analysis, route choice, and then add a Network DN for this new Node ID.
When dialing the Network DN, there is close to a 20 second delay before the call is sent to the route.
We used to have this same setup years ago and there was no delay when dialing network DNs. I have made sure I wasn't reusing the previous node ID or extensions (while troubleshooting this) and it doesn't make a difference.
I can watch the call come in on the remote PBX, so I know that the delay is on the CTX side. I just don't know what could be causing it. :shrug:
Any ideas?
Mark Sr. Systems Administrator
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,809
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, nortelvoip),
118
guests, and
400
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|