Originally posted by EV607797:
[QB] Art:
Chances are, they will terminate your T1 in an outdoor NID. This NID will provide you with an RJ48X jack. If you wire a straight-through cable using the 568A or B wiring plan (same at both ends of course), then you should be fine.
Thanks for all the replies.
So on my side of the NID I will have a jack that I can plug into and run it to where my CSU/DSU is? That's easy enough.
I'll just need to find a drill bit long enough to get through my exterior brick wall and get the guts to drill it into the basement. :toast:
