Matt:

When you get around to calling me (see my offer to help on another part of the Forum) I will let you pick out what phones you need from my collection. I have several new in box 2851's and 2565HK's.

When you go to remove the housing on the 2851 ("Cuckoo Clock Phone") you need to do it thusly:

Insert the dial remover (paper clip) into the hole at the bottom of the faceplate. Then unscrew the captive screws holding the housing onto the base.

To put the housing back on, use one hand to hold the two plungers up, one hand to seat the housing, one hand to get the two screws into their respective holes, and one hand to tighten the screws.

Arthur P. Bloom
"30 years of faithful service...15 years on hold"