|
|
Joined: Jul 2005
Posts: 28
Member
|
OP
Member
Joined: Jul 2005
Posts: 28 |
DPX plus 3b 2 cabinets. System has one Digital station card the rest are all IST. When I arrived on site the IST ports in the main cabinet were ringing but the upper were not. I assumed the Ring Generator in the upper cabinet was bad. So I moved all the IST cards into the uper cabinet and swapped out the ring generator. At this point none of the IST ports would ring. I tried moving all the IST cards to the main and moving everything else to the upper cabinet, tried different combination's of power supplies and ring generators and put everything back the way it was originally and none of the IST ports ring anymore.
First question is do both cabinets have to have a ring generator even if all the IST cards are all in one, the only reason I ask is because that's the way it sounds in the manual. I wouldn't assume that you need 2 ring generators if all the IST boards were in one cabinet. I'm kinda thinking that something in the upper cabinet caused the first ring gen to go bad and when I moved the known good one up it blew it out and now I have two defective.
I'm looking for suggestions on where to go next. What to replace and where to start.
Kevin MBM Computer System Solutions
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
109
guests, and
309
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|