|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
OP
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
I have a OfficeServ 100 (aka iDCS100 R2) which i was in the process of upgrading to 2.69, however before i could upload the new SP file, the system was turned off, and hence won't boot.
Now i have a recovery procedure where you connect a serial cable to certain pins on the mcp and hold enter while the system boots, but while doing that it doesn't work, i can see all the startup stuff, but i don't get the password prompt.
I have done this once before on 2.63 and i got to the prompt, but this one won't do it.
Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
74
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
