|
|
|
|
Joined: Jan 2002
Posts: 42
Member
|
OP
Member
Joined: Jan 2002
Posts: 42 |
Hi; cheap client got hold of an old dsc50 si; I got the system up and running but it is set so that all incoming calls go to ext 201 and then must be xfrd to extensions. He is running a pizza shop so he wants
all lines to ring and appear on all extensions.
Currently they seem to go to "500 " it says on display, that then rings on the 201 ext.
Will a system reset do this, and how do I do that or what do I need to do. Thanks!!
He also would like to not have to dial 9 first. Analog lines- he probably will never use intercom or any other features. Also will need MOH enabled if I do a system reset. Currently makes litte beep noise.
Thanks
Chris
6 lines, 6 phones. Bronx NY
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,301
Posts638,881
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
120
guests, and
278
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
