Hiya
This problem has now occurred for 3 days running, and is driving us mad!
Seemingly, at midnight, when the system is set to reset the data etc, our 7400 is not re-booting correctly, as the CMS software cannot then find the phone system, so collects no data, also the system seems to go into whatever ringplan it wants, (thus meaning we have "active" DDI's hours before any staff arrive! , and our remote site, which runs about 20 VOIP phones, which are powered over IP also, several phones do not bind to the network correctly, and therefore are unreachable as they state "plug out"
ANY ideas welcome?
Im sure its to do with the 12 midnight thing, cos once I arrive and re-boot the system by powering it off and back on, the CMS finds it ok, However, this reboot does NOT fix the VOIP phones, which we have to restart each one manually......
