|
|
Joined: Oct 2007
Posts: 157
Member
|
Member
Joined: Oct 2007
Posts: 157 |
Your problem sounds very similar but what we have found is when 2 or more RP keys are programmed and a change of selection is made i.e. RP 2 key is pressed, after a short time the red LED will revert back to RP 1 and the system mode will have changed.
Temp Fix: Under MMC507 or IT Tool 4.3.1 enter start time of 0:0 and end time of 23:59 to RP 1 to correct this problem.
If you are programming automatic scheduling on your system you will of course not experience the above problem due to this field being populated.
At this stage we have only gone to v4.30d on the 7100 & 7030 but it would seem as though the fault is common across the 7000 series with this version.
Samsung, Ericsson, NEC, Nortel Certified Installer
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,296
Posts638,853
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Keyset6),
146
guests, and
265
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|