Take a look at these pics
https://www.onecallsupport.com/gall...ons&sFolder=Complete+Claim+Solutions This was posted in another forum...due to my eye for detail I noticed the following:
1) the wires are not twisted enough from what I saw on the patch panel terminations
2) there is too much jacket removed on the workstation jack end.
3) did not see any labeling on either ends of the cables
4) in this pic, the conduit needs to have a bushing and/or a fitting depending on code.
https://www.onecallsupport.com/gallery/Complete%20Claim%20Solutions/DSCN0456.JPG Have at it..wonder what else we can find
PS. on the forum the OP said this was a Cat 6 install, I saw on the jacks, cable, and panels that it was Cat 5e.
Here is the post from the other forum
https://www.dslreports.com/forum/remark,16429885~mode=flat