Have been programming an IDS / EVX using an old 386 PC using Procomm + and the settings described in an earlier buletin board response to jpnearl. The system is running Eclipse 3.0 software.

The IDS side programs perfectly, but after selecting 3 and entering the EVX side things get interesting.

The EVX programs OK but have found that I need to refresh (F11) alot as screens come up "off" - missing lines, cursor in wrong spot, Remnants of previous screen remain, etc.

Is usually just inconvenient unless I don't notice that a line is missing, make a change and save it only to find I changed the wrong entry due to the missing line.

Have been told by a support technician that this is not unusual, normal actually. Can this really be true?