|
|
Joined: Oct 2006
Posts: 61
Member
|
Member
Joined: Oct 2006
Posts: 61 |
On a DTI-P card is preset with the following configuration you have. You should check with the T1 carrier and make sure that their configuration is correct. Futhermore the T1 card is configure for Wink Start. You should be getting DNSI not DID. In Hardware the configuration should be the following Definitions set to Standard Co Function ISDN Trunk 1 PP 2 B 3 PRI
THERE IS NO CONFIGURING THIS CARD UNLESS IT IS NOT A FULL 24 CHANNEL T1, BUT A FRACTIAL T.
Alone we can do so little; together we can do so much
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
156
guests, and
229
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|