|
|
Joined: Feb 2005
Posts: 1
Member
|
OP
Member
Joined: Feb 2005
Posts: 1 |
Was wondering if anyone had any information out there about programming a ROLM 624 phone. We have a switchboard application, that contols the phone not through TAPI but through an AT COMMAND SET. The phone is hooked up to the computer through a DCO to the serial port. I've been able to control the phone some what through some commands I have found. (XM, SI 0, DI 1). I can't find any info about the return codes. Does anyone know if there ever was a programming guide? Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Entire Thread
|
Rolm 624 At command Programming
|
chrisrockit
|
02/01/05 05:16 AM
|
|
Forums84
Topics94,288
Posts638,794
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
149
guests, and
409
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|