I am using teh original r66b 25 pair split block with 6 pins across, I have phones punched down on the left side 2 column pair 8,9,10 I have the RT briged to the right side of the block and I am using 3 sets of jumpers to go to each phones on 8 9 and 10 again going to the right side of the block and using jumpers there as well to push power back to each phone.
(light comming on) <-- in my head that is I am actually pushing teh RT voltage from pair one back into teh RT1900 on 8,9, & 10 by doing that and I am not sure I am supposed to now. thank you for the idea I will check it after work and get back.
Thank you again for the suggestions.
