|
|
Joined: Apr 2009
Posts: 1
Member
|
Member
Joined: Apr 2009
Posts: 1 |
The problem with the Tadiran APSL is the Capacitor C211 (100 micro farad). It fails because it is under rated at 25 volts. The capacitor needs to be replaced with a 50 volt capacitor. Observe polarity - the minus side of the CAP goes toward the card connector. Make sure you flow a little solder onto the connections as you heat them. There is a lot of copper to heat up before the jounts are evacuated. Heat the joints sufficiently as you resolder the cap.
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
177
guests, and
387
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|