|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
|
Member
Joined: Dec 2002
Posts: 348 |
Has anyone seen problems with the connector on the UDT office? I got called back on my first one to day due to dropped calls. DIDBG didn't show LOS's, but I could shake the cable and watch the LOS led flash. I had to "retweak" the fingers to get a good connection.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
|
Joined: Feb 2006
Posts: 80
Member
|
|
Member
Joined: Feb 2006
Posts: 80 |
nop,
check if all connector pins (springs) are not bent.
It can be the cable loose connector too.
_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |
__|_\m/__(-_-)___\m/|_ _ _ |_ _ _ |_ __ _ |_ _ _ |_ _ _ |_ _ _ |
_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |_ _ _ |
|
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
|
Member
Joined: Dec 2002
Posts: 348 |
All the pins looked straight, which appeared to be the problem. I very gingerly put enough bent in to make a better contact. If by cable loose connection you are refering to the crimp on RJ45, I'm using a premade cable to try and avoid that.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Forums84
Topics94,564
Posts640,172
Members49,868
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
19
guests, and
69
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
