I'm going to look into building my own case for this from a spare pc laying around. I'll strip out the old Motherboard, etc and stick this board in there with new stand-offs, etc...
Board should accomodate a longer 40PIN IDE cable, so I'll be able to mount the drive like a normal PC, and be able to turn the whole thing on from the front power switch.
However, I'll need to use an AT style power supply, so that i can use a REAL power switch, and not the "soft-power" switch that modern pc's use with the ATX style power supplies.
If I can find a way around powering the unit on with an ATX P/S, I'll use that instead, as finding a spare AT P/S is getting harder...
However, I can power on an ATX powersupply by jumpering the green and black on the motherboard connector, but that's far from a permanant solution.
Ryan
