Thanks for the response. I think i'm close but am not getting the desired result yet.
When i go to the call routing tables in DB programming I have 15 tables, only #1 is in use. The "Routing Key" is set to Trunk Number
My test is with my cell, When adding an entry to this table with my my cell number as the pattern (all 10 digits) and then i have it set to ring my desk phone, it doesn't work.
I tried changing the #2 table Call Routing Key to "Outside Party Number" and then entered my cell as the pattern in this table and my ext as the Ring-In destination but that doesnt' seem to work either.
As i see the 1st routing table is set to route the many different DIDs we have to their appropriate applications. (as we have 4 different recordings based on which number you call).
Any advise is as always appreciated.
Thanks,
Andy
