|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
I use the TFTP32 I login to the MGI16 see the correct IP address and type allset press enter I verify all the correct information and type reboot after that I get nothing I don't see the upgrade start or run on the screen. I don't have hyperterminal so I've used both telnet and putty. Ive also verified my pc address as the telnet server. After talking to the customer again he said this problem started over a year ago when the previous vendor upgraded to 4.46d from a 2. something release. Is there any better upgrade documentation for the MGI16 than what comes with the 1.26 software from GSBN? The customer also wants to upgrade to the latest software so he would have to replace the processor anyway and at that point Samsung recommends swapping out the MGI16 to an OAS. Ater all that the customer thinks he might go for the new 7200s to get the 5 year warranty. Thanks
John 807
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
131
guests, and
242
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|