|
|
Joined: Aug 2014
Posts: 5
Member
|
OP
Member
Joined: Aug 2014
Posts: 5 |
I just purchased a used system that the seller said was from a working environment. I need help with the system, cant seem to get the phones to have any power.
The system came with: Voice mail module a tvs-200(not hookedup at all rightnow.) 8ext box and an 4co box 13 phones kx-t7230.
As of rightnow the tvs has not been connected back up by myself. I simply connected jack on the kx-td1232(I will refer to this as the ksu from here on out) co1/2 to a single phone line. I simply got the amphenol cable I had that has already been connected to the punch block. I connected to a phone wire to pin to a 4wire phone cord at the jack that says "To EMSS". I than stripped the phone wire and connected the outer two to D1 and D2 of the jack for ext# 1. These are wires 27 for D1, and 2 for D2 on the punch block. I also tested the punch bock by connecting this wire into 26/1 and connected that to an analog phone and I have dial tone. Going back to connecting the digital phone(kx-t7230) via the outter two pins of the jack on the phone and to pins 27/2 I get a popping sound on the phone but the display doesnt display anything. What could I be doing wrong? Why cant I get the display to turn on and show anything on the screen?
I have only hooked up one extension and that is 1, and i've tried 2 of the 13 phones and both do the same thing. ANY HELP WOULD BE VERY MUCH APPRECIATED!!@!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (BobRobert),
126
guests, and
337
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|