|
|
|
|
Joined: Jun 2007
Posts: 490
Member
|
Member
Joined: Jun 2007
Posts: 490 |
Ok, well in order for the sonexis to be able to place calls it must act as a station side device. The Axxess is not expecting something to place calls through it via an E&M trunk. It doesnt look like the sonexis can do anything other than E&M. I do not know of any way to provide DT to the sonexis from the Axxess to allow it to dial out with E&M. If it could do other port types you would set half the channels to be OPX and half to be Loop Start in the Axxess that way it could place calls to the sonexis (Loop Start on Axxess) and the sonexis could place calls out (OPX ports on Axxess)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
127
guests, and
344
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
