I had 3 of the 17 voicemail ports showing as non-DVM when I looked at config D S02. I pulled the bridge clips on those ports and put them back. D S02 then shows the ports as DVM again.
I then enabled Station Lock.
I then went to the COS, only one COS had notification enabled, I disabled it.
Then the voicemail stopped answering, I rebooted the Pathfinder Server and it's working.
The ports in question:
150-150-035 KTS 24BTN INS 1 DIAL
155-155-03a VIRTUAL INS 0 IDLE
159-159-03e DVM OOS 0 ID UNKNOWN
After pulling the bridge clips and replacing:
150-150-035 DVM INS 0 IDLE
155-155-03a DVM INS 0 IDLE
159-159-03e DVM INS 0 IDLE
Pathfinder Voice Processing
Pathfinder viewport build 2.
pathfinder version 9.1.2
Frequent errors when I walked in of
"3 I!DVM Info: Packet [S0150210B5'X'] while awaiting ring alert"
So, I can see what you're saying that it could be notification. I'm hoping that without notification enabled, it will stop.
If a particular person complains about their notification not working, I'll create a COS just for them and go from there.
Thanks.