Seriously TTT, some gidget has pins 3,4 going to Co 4 of Partner and Ext. 22 back to 5,6 no lie!!
I have worked on these before, without Partner system and I know how I wire them, but sometimes I like to err on the side of caution.
Obviously it was working before I was ever called.
Today I set Ext.22 to Int. only.
Gate works but when incoming call comes into Line 1 after 3 rings hits L4 button and activates distinctive ring for gate?? I think bypass switch was hit with spike, but customer does not want me to troubleshoot further at this point.
Thank you to Hal, TTT and others on both sites for bearing with me through this thread.
