|
|
Joined: Feb 2006
Posts: 1,716
Member
|
Member
Joined: Feb 2006
Posts: 1,716 |
It's kind of hard to reply without giving specifics. We have a published rate per cable and that is divided by category of cable all the way to OSP PIC 1,000 pair and above as well as fiber.
For a standard 100' Cat 6 cable with terminations on both ends, the rate is more than $50 and less than $500. We don't differentiate between plenum and PVC as all our runs are plenum except for the OSP PIC cables.
Our rates are low because there are over 100 cable only companies that will underbid us every time. They do horrible work, but, today, it all about the lowest cost.
Most of the cable only companies bid only one termination which is buried in the small print. They end up getting the job and then the job has to be turned over to a company that will terminate to the equipment. Then we charge a higher rate than our per hour rate because we not only terminate the cable, we will then test each cable and give the client the results.
Rcaman
Americom, Inc. Where The Art And Science Of Communications Meet
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
97
guests, and
334
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|