You have an Iwatsu ECS phone system

You can determine the system IP addresses-LAN1 and LAN2 by using the attendant phone. Verify the attendant phone by dialing FEAT99, with the handset in the cradle. The display will show the extension number followed by a lower case 's' if the phone is configured as an attendant.

Leave the handset in the cradle and dial FEAT, 91 for the LAN1 address ( should be 172.30.30.30) and FEAT, 92 for the LAN2 address. LAN2 is the IP address the system uses on the local network if connected.

FEAT plus 93 will give you CCSU serial number and version number.

To perform a proper system shut-down, press and hold the power button until the 'shut down' light starts flashing.

Your best bet is to find an Iwatsu dealer and get an hour of his time to set you up with things. Thus system really isn't designed for end-user administration, especially if you've had no training on it at all.

You'll need the ECS programmer, a proprietary dealer-only item and it's quite possible a password had been used. If you need to clear it, you'll need ICON tech support to help you with that, so you're back to a certified dealer.

Hope this helps you out a little...

Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.