I looked around did not see any. I like to do a better job then explaining to a current and future clients cost for all cat5 cable hardware, rack hardware etc and show cad drawing where cable is to be routed.
Also, instead of measuring the distance for each cable run in a room say its a 40 x 40 room, do you measure the farthest location where a drop is located and the closest location from drop to patch panel then take the average length "60 feet for furthest and 40 feet or shortest...average is 50 feet x total drops? It might save alot of time.
Anyone here in the Seattle region can give me a idea what electrical houses are charging per foot for cable?
