Customer has a Amanda Soho VM4 that is not working after they had a power outage.It is connected to a DK40I. I tried to access the voice mail from phone upon arrival but would just ring forever and vm did not pick up..If i recall corectly the hard drive light was blinking red.I removed the VM took to office and plugged it in with out hooking up to anything but power and all lights flash.I tried connecting through hyper terminal and got nothng when powering on. Hard drive does not seem to be powering on.
If i replace the harddrive will the Amanda retain the intial software or will that need to be reloaded.I relalize I would have to reprogram the extensions.Any and all help appreciated.Thanks
Shaun