|
|
Joined: Dec 2018
Posts: 25
Member
|
OP
Member
Joined: Dec 2018
Posts: 25 |
I am curious to know if there is an ATA adapter out there that would allow DID information to be passed into a Toshiba system using an RDDU card? I know a Cisco SPA-112 allows VOIP calls to be converted to a "POTS" line where it would then be routed in the system using "DIT" in Trunk Assignments. However the adapter only allows 1 telephone number per line, where I'm curious to see if there's an adapter that just converts SIP to POTS and then passes the DID number into the Toshiba system where it then would route to either an extension, pilot number, voice mail .etc?
Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
71
guests, and
426
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|