sure. There are probably multiple ways to do this. Here is one. In the PBX Create an virtual extension or x port extension, lets call it extension 1111. Set the coverage path for 1 ring and to your VM hunt group.

Set up an audix extension 1111 like this.

display subscriber 1111 Page 1 of 3
SUBSCRIBER

Name: `audix call answer Locked? n
Extension: 1111 Password:
COS: custom Miscellaneous:
Switch Number: 1 Covering Extension:
Community ID: 1 Broadcast Mailbox? n

SUBSCRIBER CLASS OF SERVICE PARAMETERS

Addressing Format: extension
Login Announcement Set: System
System Multilingual is OFF Call Answer Primary Annc. Set: System
Call Answer Language Choice? n Call Answer Secondary Annc. Set: System

PERMISSIONS Type: auto-attendant Announcement Control? n
Outcalling? n Priority Messages? n Broadcast: none

INCOMING MAILBOX Order: fifo Category Order: nuo
Retention Times (days), New: 10 Old: 10 Unopened: 10
OUTGOING MAILBOX Order: fifo Category Order: unfda
Retention Times(days), File Cab: 10 Delivered/Nondeliverable: 5

Voice Mail Message (seconds), Maximum Length: 300 Minimum Needed: 32
Call Answer Message (seconds), Maximum Length: 120 Minimum Needed: 8
End of Message Warning Time (seconds):
Maximum Mailing Lists: 25 Total Entries in all Lists: 250
Mailbox Size (seconds), Maximum: 1200 Minimum Guarantee: 0

SUBSCRIBER AUTOMATED ATTENDANT MENU

Allow Call Transfer? y

Button Extension Treatment Comment
1: e call-answer
2: e call-answer
3: e call-answer
4: e call-answer
5: e call-answer
6: e call-answer
7: e call-answer
8: e call-answer
9: e call-answer
0: 0 transfer
Timeout:

Length Of Time-Out On Initial Entry : 5

Now if you want a call to some ones mailbox, do a transfer 1111. you will get the greeting "please enter an extension" dial that extension. Then hit transfer.

Hope that helps...

[Linked Image from phototiki.com]