My PC Admin is running on a IBM Thinkpad T40 with internal modem. Remote Access card is in slot one on ACS R7. I set the modem to 1200 baud and connect to station 11 on the ACS R7.

Try to connect using 'Direct Dial'= 11 -----

It always returns the message:
...device did not receive modem tone answer from the far end.....unable to establish the dialup connection.

Is my Remote Access card bad?

*********

Update - Now using an external modem, max port speed set at 1200 [and info from Avaya]:

Direct Dial = 76 [modem port?] I hear intercom dial tone, 2 digits dialed, modem answers on 3rd ring [audible click] and I hear several modem tones

then PC Admin again displays error msg:

'...device did not receive modem tone answer from the far end.....unable to establish dialup session.'

Any ideas?

Thank you for help!

JW

You only need to know the right button to push-