Ok, the V1030's will be powered by the 24VDC output from the V2001A. The V1030's will get their audio from the V2001A. The V2001A audio input will bridge across the output of the PA2A. The load on the PA2A will be negligible (Not Much). The Power for the V2001A and the V1030's will be provided from the power supply INside the V2001A. That's what the ac power cord connector on the V2001A is for. Go to www.valcom.com and get the installation manuals for the V2001A and V1030C, if you don't have them. They're free, Valcom wants you to succeed! Again, it really is that easy! John C. (Not Garand)

When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.