|
|
Joined: Oct 2003
Posts: 25
Member
|
OP
Member
Joined: Oct 2003
Posts: 25 |
Can the 50 do trunk to trunk and let the station or console out of the call? It works if the station or console stay as a party to the call but as soon as the station or console hangs up the trunks disconnect. BTW the 50 has MCII and MS55.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2004
Posts: 290
Member
|
|
Member
Joined: Nov 2004
Posts: 290 |
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Command 100, Register 05, Bit "C" (CO to CO Connection) needs to be set to a "1".
It sounds like you're already able to set up a conference, so check this setting that allows the 2 trunks (assuming COs) to stay connected.
|
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
|
Member
Joined: Apr 2007
Posts: 339 |
I believe you also need in the cos of the person tandeming the trunks their cos register "j" as a "1"
|
|
|
|
|
Joined: Oct 2003
Posts: 25
Member
|
|
OP
Member
Joined: Oct 2003
Posts: 25 |
Well... I'm missing something. Checked all the bits that fifty5 and panda mentioned, they were already set. Still can't connect 2 trunks and have the station that set up the conference hangup without the trunks disconnecting.
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Ok.
In the trunk programming, register 1, bit "G".
Otherwise, you can get in touch with me while you're on-site, and we can go through the setup!
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
