sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems Data Set?

He is telling you he needs a SOT (start of text) and EOT (end of text) framing the message. Plus the rest of the message needs to be formatted with correct spacing, etc. A bunch of values in rate table 1 in the prophet need to be changed. You are going to have to get in or have someone get in and change those values. If you do it yourself be very careful not to change anything you don't need to.

BTW I was never a big fan of using the console for dataset unless it was the only option. Can certainly involve cabling issues unless the console is close to server/link to server. But that is just my preference.

Just as a note, the serial port on the console is an output port only, for serial printing.
It's not designed for 2 way (Asynch/Synch).

TDS I do have a blue floppy holder with about 5 floppies. I have tried to read those at one point but the computer can't read those disks. It asks to format them. (I choose no) But when I loaded up my linux machine, I can see there are files on the disks. Just not in a readable format. for IBM/Dos then there is the ProphetH disk. I have made images and put them on CD incase these disks would degrade or get damaged.

I have a desktop I'm bringing in and will take a look at all the documents I can to see if I am able to change these settings.
I know I was in the prophet once to change a few rate codes.

Those diskettes are "Mitel" formatted.
'It's a phone system, not a PC'!
I think TDS was curious to know the rev. level that's printed on them! That can also be found by ging to the console, and pressing the hard key labeled "Function", then the softkey labeled "Identity".

Yes - PLEASE do not even put those disks in your PC again. Those disks can be very easily damaged. Hopefully they are not corrupted already.

If you have been in the prophet before to change rates then get in touch with Micros and have them FAX or EMAIL you the interface settings for Rate table 1. Someone there will have the document.

If they don't (or say they can't find it) post here and I will see if I can track it down for you and post it here.

I called the Interface tech. He told me the vedor should have those settings.
When I called the vendor he told me he doesn't know off the top of his head. He may be able to figure it out if he was there.

If you could locate the settings that would be great.

Look here they are. Once again the PMS people are not helpful at all. Once again everyone else has to know how to do their hob for them.

I would suggest you save this to a test file. Then when you are in the prophet just copy these to the clipboard and in Hyperterm click on Transfer and then Send Text File and it will save you from having to enter them one at a time. One word of caution before doing that get into rate table one then open up a "capture text file" type in 000 then Y and let it print down through location 199 then stop. Save this to a file in case you need to restore it. I have posted the info here in case anyone else wants to save it as well. Also don't worry if you see some numbers missing - I edited out the things that don't pertain to PMS interface.


030 0.00 031 0.00 032 0.00 033 0.00
034 0.00 035 0.03 037 0.55
038 0.00 039 0.04
040 0.00 041 0.00 042 0.00 043 0.00
044 0.00 045 0.00 046 0.00 047 0.00
048 0.00 049 0.00
050 0.00 051 0.00 052 0.00 053 0.00
054 0.00 055 0.00 056 0.00 057 0.00
058 0.00 059 0.00
060 0.00 061 0.00 062 0.00 063 0.00
064 1.21 065 1.10 066 0.00 067 0.00
068 0.01 069 0.00
070 0.00 071 0.00 072 0.00 073 0.00
074 0.00 075 0.00 076 0.00 077 0.00
078 0.00 079 0.00
080 0.00 081 0.00 082 0.00 083 0.00
084 0.00 085 0.00 086 0.00 087 0.00
088 0.00 089 0.00
090 0.00 091 0.00 092 0.01 093 0.00
094 0.00 095 0.00 096 0.00 097 0.00
098 0.00 099 0.25