sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems Data Set?

ok think I have found what I'm looking for.

PMS Parameters (USED IN RATE TABLE 1 ONLY)
I'l try to hyperterminal in and see what I get.

in the above do not enter location037 as that is the second flat rate location and has to do with call pricing. Also you will probably need the other stuff I posted above as that relates to call formatting, flagging, etc.

I can connect with the prophet H software, but the Hyperterminal I'm having issues with. I dont know how to use HyperTerminal.

I connect teh serial connection up, new connection, com1 ?, then set the baud and other settings as the same as the prophet. But here is where I get lost.

when you set up the connection make sure you are at the correct baud rate (on the prophet it will be 1200 or 300) and make sure you go to settings and set your terminal type to VT100 - don't leave it at auto detect.

Go here to learn how to access h3 & programming

https://www.atcomm.com/SUPPORT/training/index.htm

Looks like everything is all sorted out.

I added the fields, for the start of text and end of text. I have yet to call the Interface installers.

I do have a few other questions but i will make a new thread as it is for rate programming.

Thanks for the help.

BTW, I had to pull out my IBM Thinkpad 365E to use this. I dont know how old this thing is, but it's doing this just perfectly. I also hot the terminal working by double checking the settings.

I freakin hate PMS....All of it!Nothing but a nightmare everytime!!!!!!!!

It's not too bad, once the PMS folks realize that you do know what you're doing. When I was a 'roady' doing Mitel installs, I did so many, I actually had the same PMS on-site folks several times. And what really cracked me up was when they would hand me a much copied sheet of handwritten specs and I would pull out the original and say,'The original is easier to read'. I might add that I signed it before I faxed it to the headquarters of the PMS folks that will remain unamed. John C. (Not Garand)

Update time.

I called the project manager and she told me once I make my changes then system should be up. So we double checked and no calls comming in. The interface guy called and told me the settings are wrong on my end. I ask him what exactly is the format of the call accounting he needs, Any order of the information. He told me he would call back later when he has that information....

What do you know, a few hours later, a different interface guy called and told me he would have their end fixed up in an hour or two. Phone calls coming through and being billed. All with no dataset.

Thanks for all the help guys.

I am having the same issue with calling accounting interface with micros but am using suma pro xiox does any one know the values to change suma pro so micros cn see start of test end of test. xiox doesnt support suma anymore