Phone Systems


Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 2 of 4 1 2 3 4
#111272 - 02/12/10 04:49 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Jul 2003
Posts: 1,123
johnp Offline
Member
johnp  Offline

Member

Joined: Jul 2003
Posts: 1,123
Ann Arbor, MI
You can verify by removing the card and visually inspecting. On a Digital, bay 2 - slot 3 is lower right, upper level on left. What else is on the universal card? Also what type of card is in bay 2 slot 4?

Mitel search for systems, cards, phones, software, manuals and repairs!
Mitel Equipment Search
Mitel Superset 4025 $35
#111273 - 02/12/10 05:48 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Oct 2004
Posts: 1,056
fifty5footer Offline
Member
fifty5footer  Offline
Member
****

Joined: Oct 2004
Posts: 1,056
Phoenixville, PA
OOPPSS!!! Shoveling snow for a week makes the mind go numb!!


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
#111274 - 02/12/10 06:09 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Jul 2003
Posts: 1,123
johnp Offline
Member
johnp  Offline

Member

Joined: Jul 2003
Posts: 1,123
Ann Arbor, MI
If we are in agreement, the 600 Ohm output of your music source needs to be connected to pair 23(V/G) of the bay 2 slot 3&4 block.

The module only provides an interface to an external source.

My question regarding slot 4 is if there is a T1, they may have failed to recconnect the cable.

#111275 - 02/15/10 04:32 PM Re: MOH setting up in SX-200D (G1004)  
Joined: Sep 2009
Posts: 21
acitech Offline
Member
acitech  Offline
Member

Joined: Sep 2009
Posts: 21
Miami, FL
Sorry but I'm on the same point: MOH doesn't work. MOH module is on Univ Card (module # 4). Option # 602 is ENABLE in all COS in use (rooms, trunks, digital phones, console, ...) now.

I took a look on cards and they are as follow:

Bay=02 Slot=03 UNIVERSAL CARD
02-03-01 CONSOLE MODULE
02-03-02 DTMF RECEIVER
02-03-03 DTMF RECEIVER
02-03-04 MUSIC PAGER MODULE (Music/Paging Module 9109-018-000)

Bay=02 Slot=04 UNIVERSAL CARD
02-04-01 CONSOLE MODULE
02-04-02 DTMF RECEIVER
02-04-03 Non programmed
02-04-04 Non programmed

I punched down on pair 23 of J25, MOH amplifier 600 ohm output, I'm able to hear it but several calls on hold and I just hear air".

Any other idea to checking, please.

THANKS.

#111276 - 02/16/10 04:35 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Jul 2003
Posts: 1,123
johnp Offline
Member
johnp  Offline

Member

Joined: Jul 2003
Posts: 1,123
Ann Arbor, MI
Could be a bad card, module, or cable. You could move the module to either the 3rd position on the same card or positions 3 or 4 on the slot 4 card.

You would need to make the changes in form 1 and 18

#111277 - 02/23/10 10:38 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Sep 2009
Posts: 21
acitech Offline
Member
acitech  Offline
Member

Joined: Sep 2009
Posts: 21
Miami, FL
Testing Music-Pager-Module in different UNIV card now. 02-04-04 circuit corresponds to pin 10 (RED/SLAVE pair) on same J25 connector. Is this correct? Thanks.

#111278 - 02/23/10 08:07 PM Re: MOH setting up in SX-200D (G1004)  
Joined: Jul 2003
Posts: 1,123
johnp Offline
Member
johnp  Offline

Member

Joined: Jul 2003
Posts: 1,123
Ann Arbor, MI
Red/Slate pair would be correct on same J25 i.e. 10th pair.

#111279 - 02/25/10 10:07 AM Re: MOH setting up in SX-200D (G1004)  
Joined: Sep 2009
Posts: 21
acitech Offline
Member
acitech  Offline
Member

Joined: Sep 2009
Posts: 21
Miami, FL
Sorry guys, but no good luck so far. I installed same Music/Paging Module hardware on a different MITEL SX-200 and it worked. Also, I moved it to 02-04-03 and 02-04-04, with setting on form # 1 & 18, which implies different UNIV card and different pairs although same amphenol cable, and nothing good so far.
Any other suggestion? some option to set we're missing? Thanks!

#111280 - 02/25/10 11:59 AM Re: MOH setting up in SX-200D (G1004)  
Joined: May 2005
Posts: 372
AKroger Offline
Member
AKroger  Offline
Member

Joined: May 2005
Posts: 372
Palm Harbor, Florida,Pinellas
Have you checked/changed the AMP cable - or can you move it to the other bay to eliminate the cable?

And as JohnP stated have you verified you input impedance 600Oohms and input level -6 dBm. Its been a while but I remember installing an inline matching transformer to get MOH to work on a 200D.


Alex Kroger
Pinnacle Communications Corp
Mitel/Hitachi
Nationwide Hospitality Provider
#111281 - 02/25/10 12:12 PM Re: MOH setting up in SX-200D (G1004)  
Joined: Sep 2008
Posts: 385
Steve Layton Offline
Member
Steve Layton  Offline
Member

Joined: Sep 2008
Posts: 385
Scappoose,OR
2-4-3 and 2-4-4 are the same card different module which would be red/orange or red/slate pairs of J25. Are those what you are using?
Do you have 2 consoles and do they work?

Page 2 of 4 1 2 3 4

Moderated by  DrPbx 

Refurbished Phones & Equipment Search
Shout Box
FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
Just got these in and want sold,
by usedphones. 08/14/18 10:41 PM
august 15
by dude. 08/13/18 11:12 PM
RIP Toshiba version 2.0
by John Olden. 08/13/18 09:31 PM
Anyone have an Gen 2 ESI 482 Card?
by upstateny. 08/13/18 08:11 PM
5000-4707 - ESI 30D Business Phone
by ThePhoneConnection. 08/13/18 04:11 PM
Who's Online Now
54 registered members (dude, Z-man, justbill, newtecky, JBean3329, usedphones, smithdog, YadaYadaTelecom, gelehu, brokeda, Yoda, Professor Shadow, pdxjim911, RedBul, BTS01, MooreTel, Ricco, oobie, Central Coast Tom, pvj, jab1780, Ruben, Touch Tone Tommy, John Olden, dans, Agonnazar, Bob3470, BobRobert, Iwatsu Guru, Larry M Wall, GeorgeO, DuddlyDoRight, hbiss, cctech, joshuacook, Steve Hess, upstateny, Carl Navarro, ThePhoneConnection, dexman, srg, Silversam, dian99, erniejoey, RonP, bditech, SSPhone, Gerrya, Coral Tech, mike b, phonman123, Skunky, 2 invisible), 1,181 guests, and 808 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
John Olden, Michael Guin, Southernphoneman, YDY, Guardian Angel
48693 Registered Users
Forum Statistics
Forums60
Topics91,348
Posts621,852
Members48,693
Most Online5,661
May 23rd, 2018
Today's Birthdays
Abcomm, n1cn0c, nicnoc, reataylor
Top Posters(30 Days)
dexman 35
Yoda 15
Free Voip phone with every line!
FREE Voip Phone - Click Here!
RESPONSIVE WEBSITE DEVELOPMENT
Ad Spot for sale!
Free Phone Repair Diagnostic
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2018
Trusted Partners
Sitemap