|
|
|
|
Joined: Apr 2005
Posts: 2
Member
|
OP
Member
Joined: Apr 2005
Posts: 2 |
We physically moved two phones and then I switched the DN's. (Which I found out later that we should not have switched the phones.) One of the phones works but the other doesn't. You can call internally to the extension and it works. But when you call from the outside and put in the extension during the AA message, it goes directly to her voicemail. DND is not set and she isn't on the phone. Any ideas?
Thanks!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 2
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 2 |
I forgot to mention that it is an Nortel Modular ICS 4.0 phone switch.
|
|
|
|
|
Joined: May 2003
Posts: 1,362
Member
|
|
Member
Joined: May 2003
Posts: 1,362 |
Changing around the DN's and moving phones at the same time can get confusing pretty quick, especially if the "Set Relocation" feature is turned on in programming. I would start by making sure the extensions are really what you think they are. Press "FTR * 0" then the intercom key and the display should show you the phones DN.
|
|
|
|
Forums84
Topics93,967
Posts637,414
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
