How many CO on 0x32

Print Thread

Rate Thread

How many CO on 0x32 #126644 01/19/06 02:08 AM
Joined: Dec 2005 Posts: 818 Tampa tampasteve Member
tampasteve Member Joined: Dec 2005 Posts: 818 Tampa	I am just kind of curious, how many CO lines can one put on a 0x32 cabinet? Also, what are the max configurations? I cannot seem to find them anywhere on the net, including Nortel.... Thanks, Steve

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: How many CO on 0x32 #126645 01/19/06 02:12 AM
Joined: Apr 2005 Posts: 194 Chino Hills, CA, 91709 gamedinasr Member
gamedinasr Member Joined: Apr 2005 Posts: 194 Chino Hills, CA, 91709	Steve you can add 2 combo cards to that switch which will accomadate a total of 12 modules, stations, and trunks, plus the 2 trunk cartridges you can put in the main cabinet, a few different combinations.

Re: How many CO on 0x32 #126646 01/19/06 03:00 AM
Joined: Dec 2005 Posts: 13 Fort Worth Texas gdbeam Member
gdbeam Member Joined: Dec 2005 Posts: 13 Fort Worth Texas	If I remember correctly you can add a maximum of 6 trunk modules with correct expansion cartridges giving you a total of 72 lines, plus 8 lines with cartridges on KSU.

Re: How many CO on 0x32 #126647 01/19/06 03:19 AM
Joined: Aug 2004 Posts: 1,751 Likes: 49 Calgary, AB, Canada Toner Admin
Toner Admin Joined: Aug 2004 Posts: 1,751 Likes: 49 Calgary, AB, Canada	That sounds about right gdbeam. You can also install 3 pri/t1's for a total of 69 or 72 digital trunks. Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!

Re: How many CO on 0x32 #126648 01/19/06 04:42 AM
Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada telemarv Member
telemarv Member Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada	Analog configuration: MICS 7.0XC 8x224 to a max of 80x132 Below 7.0 it's 8x192 to a max of 80x96 Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990

Re: How many CO on 0x32 #126649 01/19/06 08:57 AM
Joined: Dec 2005 Posts: 818 Tampa tampasteve Member
tampasteve Member Joined: Dec 2005 Posts: 818 Tampa	Thanks a lot guys/gals. That is about what I thought, but I was not completely sure! Thanks, Steve

Re: How many CO on 0x32 #126650 10/24/06 07:43 AM
Joined: Jul 2004 Posts: 279 Conyers,Ga dell Member
dell Member Joined: Jul 2004 Posts: 279 Conyers,Ga	Need to add co line in system. If you say you don't know you will get more respect.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems How many CO on 0x32