|
|
|
|
Joined: Nov 2006
Posts: 70
Member
|
OP
Member
Joined: Nov 2006
Posts: 70 |
Callpilot 150. Customer wanted to change the timeout on the AA menu prompt from ringing at ext 221, to directly leave a message in the gen mbox. So in F982 I programmed Atdt Available:N and Atdt:100. Changed Atdt to 100 in F983 in the corresponding greeting table. Now when calls time out from AA you hear "One moment please..." and then dead air. The call just hangs there. Same thing if using a CCR tree. Rebooted with no change. What's going on here? :confused:
"If at first you don't succeed, keep on sucking till you do succeed." - Curly Howard
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2005
Posts: 2,256
Member
|
|
Member
Joined: Jun 2005
Posts: 2,256 |
You are putting the attendant as 100. Does 100 exist on the system as an extension? Or is it just a mailbox.
On the timeout, it's going to try to go out to an extension somewhere, not a mailbox.
|
|
|
|
|
Joined: Nov 2006
Posts: 70
Member
|
|
OP
Member
Joined: Nov 2006
Posts: 70 |
I've had success with this setup on other systems. I did try 221 as attendant and available:N and the Callpilot actually continues to ring 221 on timeout.
"If at first you don't succeed, keep on sucking till you do succeed." - Curly Howard
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Set Gen MB (MB 100) ext to 221 and then just call forward (F4) the reception phone to the voicemail DN whenever you want incoming calls to go directly to the general. This give an easy option to allow the reception to answer when available.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Nov 2006
Posts: 70
Member
|
|
OP
Member
Joined: Nov 2006
Posts: 70 |
Mailbox 100 is assigned to 221. Because all calls initially ring on 221, forwarding to VM would disable my AA and that's not an option. I just want to eliminate calls re-ringing 221 from AA. The programming I described above should work but it doesn't. I'm thinking it's a bug. Anyone see this as a fix in newer software releases? Not exactly sure what version this 150 is running but I know it's some form of 2.0.
"If at first you don't succeed, keep on sucking till you do succeed." - Curly Howard
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
o Because all calls initially ring on 221 You didn't say that in your initial post. You gave the impression calls were answered by the AA. Everything in F982 except "business open status" is overridden by entries in the table. Make sure the table entry for attendant is blank and 221 is your attendant in 982.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
80
guests, and
418
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
