|
|
|
|
Joined: Jul 2007
Posts: 32
Member
|
|
Member
Joined: Jul 2007
Posts: 32 |
I have a customer with a MICS 4.0 software release
that would like to CF an incomming DID call to a cell phone, home etc.
The have a PRI as well an a T1 card that they receive TIE line calls on.Line redirect will probably work for 1 or 2 users because they do have some copper trunks. However, this could be a cans of worms I do not want to open .
Thanks in advance for any positive replies and or ideas.
A D K
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2006
Posts: 254
Member
|
|
Member
Joined: Aug 2006
Posts: 254 |
Upgrade to 4.1, which will let you forward calls out of the system. You can probably find it on ebay cheap.
|
|
|
|
|
Joined: Jun 2007
Posts: 7
Member
|
|
Member
Joined: Jun 2007
Posts: 7 |
you should be able to setup a route to the PRI(should already be setup), then use call forward , access code and number.
I have done it like this before, you also need allow redirect:Y for this to work.
You can have it done Right, Quick or Cheap. Pick two.
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
165
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
